Ceramic Adhesive and Grouts

AQUA-TILE WATER RESISTANT TILE ADHESIVE (3.75Kg / 7.5Kg / 15Kg)

An off-white, ready mixed, water-resistant, instant grab tile adhesive that can be used as an all round interior grade ceramic wall tile adhesive. Has excellent bond strength and good coverage rates. CE Approved: EN 12004:2007 Type D, Class 2.

Application: Recommended for wall tiles only. Suitable for use in power showers, kitchens, bathrooms, etc, provided it is used with a waterproof grout. It embodies unique ""non-slip"" properties but allows for adjustment while fixing; in most cases this eliminates the use of battens. NOTE: It is unsuitable for swimming pools or other areas subject to total immersion. Not suitable for use with large format tiles.

GRIPBOND CTA (7.5Kg / 15Kg)

A premium quality, off-white, waterborne, ready mixed adhesive paste for wall tiles. Manufactured from the latest terpolymer technology, it is suitable for use as an all round interior grade ceramic wall tile adhesive. Has superb grab an non-slip characteristics. BS EN 12004 Conformation: Type D Class 1T.

Application: Can be used in domestic showers, kitchens, bathrooms etc. provided it is used with a waterproof grout. It embodies unique "non-slip" properties but allows for adjustment while fixing; in most cases this eliminates the use of battens. NOTE: This product is unsuitable for use in swimming pools or where prolonged wet conditions exist. It should also be used with porcelain tiles. Do not use in areas subject to rising or penetrating damp or with large format tiles.

SUPER-GRIP CTA (1.5Kg / 7.5Kg / TRADE PACK)

An off-white, waterborne, ready mixed adhesive paste, for use as an all round interior grade ceramic wall tile adhesive. Has high spreadability rate. BS EN Conformation: Type D Class 1T.

Application: Suitable for use in domestic showers, kitchens, bathrooms, etc, provided it is used with a waterproof grout. It embodies unique ""non-slip"" properties but allows for adjustment while fixing; in most cases this eliminates the use of battens. NOTE: It is unsuitable for swimming pools or other areas subject to total immersion. Not for use with large format tiles.

FIX 'N' GROUT TILE ADHESIVE (1.5Kg / 3.75Kg)

A brilliant white, ready mixed adhesive paste for use as an all-purpose, thin-bed waterproof ceramic wall tile adhesive and joint filling grout. Suitable for fixing all types of ceramic wall tiles, including mosaics, porcelain and vitrified tiles in internal locationsCE Approved: EN 12004:2007 Type D, Class 2.

Application: For use in areas such as bathrooms, kitchens and shower areas, where the tile surface is subject to frequent wetting but not total water immersion. Can be applied to gypsum plaster, cement fibreboard, existing tiles, cement render, timber panels and plywood composite boards. It is recommended for use on any tiled surface which is subject to persistent humidity or frequent wetting. The dual purpose application of this product make it particularly suited to small area DIY applications and localised repairs. (Not recommended for large format tiles.)

FLEXIBLE WIDE JOINT GROUT (10Kg) GR

A cement-based, highly polymer modified, joint filling compound for tile joints from 3mm up to 20mm wide around all types of ceramic floor and wall tiles. A specially formulated grouting compound for applications where tiles have been fixed with either a standard or flexible adhesive and where some slight degree of surface movement or vibration is anticipated. Provides a flowable, readily compactable grouting slurry, that produces stable, floor tile joints without shrinking or cracking. Specification Type: EN 13888:2002 Type CG Class 1..

Application: WIDE JOINT GROUT will set to a hard, durable, waterproof finish, suitable for interior and exterior applications and also in fully immersed locations such as swimming pools. Joint width: from 3mm-20mm.

FLOOR TILE GROUT (3Kg / 10Kg) GR

A cement-based, joint filling compound for floor tile joints from 3mm up to 10mm wide around all types of ceramic tiles. Formulated to provide a flowable, readily compactable grouting slurry, which can be easily applied across all types of ceramic tiled surfaces. Sets to a hard, durable, waterproof finish. Conforms to: EN 13888:2002 Type CG Class 1.

Application: Suitable for interior and exterior applications, including swimming pools. Joint width: from 3mm-10mm.

WALL TILE GROUT (1Kg / 3Kg / 10Kg) WH / IV

A cement-based, joint filling compound for tile joints up to 3mm wide around all types of ceramic wall tiles. Sets to a hard, durable, water-resistant finish, suitable for interior and exterior applications. Specification Type: EN 13888:2002 Type CG Class 1. Available in White / Ivory.

Application: Ideal for all types of ceramic tiled surfaces. This product is waterproof, making it suitable for both internal and external applications, including swimming pools.

CTA CERAMIC TILE ADHESIVE (20Kg)

A white, water and frost-resistant ceramic floor and wall tile adhesive. Cement based powder which offers excellent non-slip characteristics and good adhesion to most substrates. BS En 12004 Specification: Type C Class 2T.

Application: For fixing all types of ceramic floor and wall tiles, mosaics, cladding brick slips to concrete, render, brick work and block work. Can be used on timber panels, composite boards and impermeable surfaces, however, addition to latex acrylic additive is recommended to improve flexural strength. Suitable for interior and exterior use, particularly swimming pools, showers, saunas and bathrooms.

CTA FLEXIBLE (20Kg)

A white, thin-bed, ceramic tile adhesive with excellent non-slip characteristics. Has a regular setting speed and forms a strong bond to fully vitrified tiles and is ideal for tile-on-tile work. Its flexibility allows it to be used on backgrounds subject to limited movement, flexing or vibration. It is completely waterproof, frost-resistant and is suitable for interior and exterior use, particularly swimming pools, showers, saunas and bathrooms. BS EN 12004 Specification: Type C Class 2TFS1.

Application: For fixing all types of ceramic floor and wall tiles, porcelain, mosaics, natural and similar wall and floor finishes. Can also be used on timber panels, composite boards and impermeable surfaces.

RAPID-FLEX TILE ADHESIVE (20Kg) WH / GR

A one-part, rapid setting, flexible floor and wall tile adhesive. Suitable for all types of ceramic floor and wall tiles, including mosaics, porcelain and vitrified tiles. BS En Specification: Type C Class 2F. Available in WHite / Grey.

Application: Ideally suited for application onto timber panels, wood floors, plywood, composite boards and impermeable surfaces, such as existing quarry tiles, mastic asphalt and powder-floated concrete without the need to include a flexi additive in the mix. Can be used internally or externally and will set sufficiently to receive light traffic in approximately 2-3 hours.

RAPID-SET TILE ADHESIVE (10Kg / 20Kg) GR

A specially formulated, fast-setting, thick or thin-bed adhesive for bonding ceramic tiles and mosaics to walls and floors. Because of these fast acting properties, tiles and mosaics can be grouted and suitable for use in approximately 2-3 hours after fixing (at normal room temperature). Interior and exterior use, particularly in locations which are subject to occasional wetting, eg. domestic showers, saunas and bathrooms. BS En Specification: Type C Class 1F

Application: Ideal for bonding to concrete, cement/sand screeds, building blocks brickwork and wooden surfaces. Certain surfaces may need to be suitably primed prior to fixing. See technical data sheet for details. NOTE: This product is not suitable for swimming pools or areas subject to constant water immersion.

FLOOR TILE GROUT

Water resistant grouting compounds for wall tiles and floor tiles.

A grey, cement-based, wide joint filling compound for tile joints from 3mm up to 12mm wide around all types of ceramic floor tiles. Can be used in interior and exterior applications.

Colour available: Grey

WALL TILE GROUT

Water resistant grouting compounds for wall tiles and floor tiles.

A cement-based, polymer modified narrow joint filling compound for tile joints up to 3mm wide around all types of ceramic wall tiles. Can be used in interior and exterior applications.

Colours available: White / Ivory

PORCELAIN TILE ADHESIVE

For Large Format Natural Stone Tiles

Flexible, non-slip, fast setting, cement based tile adhesive. Suitable for beds of 3-12mm, interior and exterior grade, for wall and floor installations. Conforms to EN 12004 Class C2FT.

USES: For fixing ceramic, porcelain, large format, natural stone, marble, travertine and mosaic tiles to a variety of substrates including heated screeds and overboarded timber.

  • • Water resistant
  • • Suitable for bathrooms, saunas and swimming pools.
  • • Fast setting
  • • High early strength

Colours available: White / Grey. Note: For porcelain or light coloured tiles, that may be subject to staining, you must use the white based powder to avoid trowel marks grinning through.

STERI-GROUT

Mould Resistant Flexible Floor & Wall Tile Grout

Cement based floor and wall tile grout. Recommended for sanitary installations ie. kitchens, bathrooms, toilets and shower rooms.Containing a strong fungicide it will also inhibit black spot mould growth.

Uses: In areas of limited movement/vibration ie. over timber ply-boards and heated sub-floors. Excellent adhesion characteristics to porcelain and fully vitrified tiles, has low permeability and
reduced dirt pick up.

Colours available: White; Ivory; Limestone; Grey; Black

WHITE WALL TILES

White wall tiles.

44 Tiles per box, approx coverage 1m².

Tile size: 150mm x 150mm.

TILE SPACERS

Ensures uniform gaps between tiles. Can be grouted over. 2mm for 6” tiles and 3mm for floor tiles. 5mm spacers are designed to expand and contract slightly, giving you the flexibility you need when floor tiling.

TILE TRIMS

Colours available: White, Ivory, Cream, Beige, Gold, Chrome, Misty Peach, Night Blue, Black, Grey, Whisper Blue.

Available in 8ft size

BATH TILE TRIMS

Type: Under Bath Tile Trims, Over Bath Tile Trims.

Colours available: White, Ivory, Peach.

Available in 6ft size

Grout Gun

Trigger-action high-thrust pointing and grouting gun. Hardened drive parts with rubber plunger between two metal plates. Includes two nozzles, mixing paddle, mortar gun and barrel.

Spares kit contains two nozzles and a barrel. Overall length 540mm. Only use soft building sand. Wash thoroughly with water after use. Always use a plasticiser with mortar mixes.

Grout Gun Aluminium

It is ideal for jobs such as re-pointing walls, filling gaps in patio slabs and grouting floor and wall tiles. The body is made from aluminium which reduces the abrasion effect of the aggregates being used, unlike plastic versions which wear quickly and need replacing more often.

380mm /15” Aluminium body including ratchet mechanism and plunger NOT FOR USE WITH SHARP SAND OR GRAVEL

Grout Float

Grout float with 15mm EVA cushion and 3mm white rubber base. Bevelled edges and rounded front corners for even spreading.