A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls and tanks. CE Approved EN998-1:2010
- • Excellent adhesion to most common building materials
- • Water based - safe to apply on damp surfaces. Just mix with water
- • Easy application - applied by brush
- • Resistant to positive and negative water pressure up to 7 Bar
Ideal situations for use:
- • Tanks, pits and swimming pools
- • Above and below ground walls and floors
- • Cellars, underground rooms
- • Interior spaces e.g. ducting, party walls, lift shafts
- • Fish ponds
Can be used with Bond It PLUG-IT for stemming water leaks in masonry. A rapid setting, watertight barrier suitable for use with clean fresh water. Cures in less than two minutes. Use as a seal for joints prior to over coating with Bond It Tanking Slurry.
- • Seals and fills cracks and joints
- • Plugs running water leaks
- • Can be used to anchor fixings
Rubberised Bitumen Compound
Bituminous Black Paint
A solvent borne bituminous black paint. When dry it forms an odourless and taint free bitumen film. For the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water.
A high performance, brush applied, damp proof coating consisting of a rubber bitumen emulsion which, when applied, provides a waterproof and vapour resistant barrier. The product, which bonds to a range of building materials, has excellent flexibility and crack resistance even at low temperatures.
Silage Pit Coating (25L)
A high performance, brush applied, damp proof coating consisting of a bitumen emulsion which, when applied, provides a waterproof resistant barrier for silage pits. Black in colour. Also available as a joint compound for cracked floor areas.
SealAcryl (5L / 20L)
A solvent-based, multi-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.
Benefits: excellent adhesion, application in damp weather, instant protection, superb solar reflectivity, reinforced membrane, one coat application, seamless, fully flexible, unaffected by temperature.
INTEGRAL WATERPROOFER (5L / 25L)
A high strength cement waterproofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists water penetration even under pressure. Available in Pink.
Application: Add to gauging water. To obtain maximum benefit the minimum amount of water should be used in the mix together with an appropriately rich cement to sand aggregate ratio. In application, the mortar must be well compacted to give a dense homogenous body. Available as either a pink or green liquid.
ULTRA WATERSEAL (5L)
A premium grade, solvent-free silicone waterseal conforming to BS6477 part 1,3 and 4. Provides a micro-porous water-repellant coating for masonry work, which, while repelling exterior water, allows the emission of water vapour ensuring the interiors and cavity walls remain dry. Used as a masonry waterproofer suitable for use on brick, stone, concrete and unglazed tiles. It protects the surface against water and frost, providing a micro-porous coating which does not change the aesthetic appearance of a building. A secondary benefit of the product is to repel waterborne dirt and resist fungal growth as well as help reducing heating costs, as energy is not wasted in drying out damp walls.
Application: This product is ready -to-use. Shake well before use. Apply using a brush or non-atomising spray. Conforms to BS6477.
A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage cuased by water and frost. Conforms to BS6477 substrate groups I & II. Protects against water and frost, providing a breathable coating which does not change the physical appearance of the building.
Application: Used as a masonry waterproofer suitable for use onbrick, stone and concrete. It will repel waterborne dirt and resist fungal growth as well as help reducing heating costs as energy is not watsed in drying out wet walls. Offers years of protection.