Floor Paints & Coatings

Floor Degreaser

A powerful degreaser based on a mixture of Aliphatic Hydrocarbon and emulsifying agents for fast removal of dirt, oil and grease. Size: 5ltr.

Uses: For heavily contaminated flooring, dissolves dirt, oil and grease by penetrating into the surface. Removal is by hosing or mopping.

Floor Etch Treatment

A Hydrochloric Acid based solution designed to open up dense concrete, neutralise newly laid concrete and remove surface laitance quickly. Size: 5ltr.

Uses: Applications to floors which are too hard, highly alkaline, granolithic or coated with surface laitance (soft weak surface layer).

One Coat DPM

One Coat Universal DPM is a two part, epoxy based damp proof membrane. Size: 10kg.

Uses: This one coat has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application. For coverage rates contact our office.

Universal DPM

A solvent free, two part, epoxy based damp proof membrane which achieves emicode ECI status. Size: 10kg.

Uses: This solvent free DPM has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application. For coverage rates contact our office.

Surface DPM

A two part epoxy moisture vapour suppressant and surface damp proof membrane. Size: 10kg.

Uses: This Surface DPM has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application. For coverage rates contact our office.

Dustproofer & Hardener

A premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Size: 5ltr.

Uses: Suitable for use on garage, warehouse, factory or workshoop floors. Apply a uniform, thin coat onto the surface brushing in well, do not allow to puddle. Once the first coat has cured (normally overnight) apply a second coat. Very porous surafces may need further applications. After last application leave for 24 hours to allow final coat to dry. Note: Do not use on masonry or coloured concrete. Very dense powder floated floors may nor permit effective penetration. Do not wash floor for at least 24 hours after final coat.

Floor Epoxy Sealer

A two pack epoxy aqueous based sealer whcih bonds strongly to concrete, cement and prepared floor areas, including damp surfaces. System has excellent alkali resistance. Size: 5ltr.

Uses: Sealing of new and damp concrete flooring areas prior to main coating. Can be used as a clear floor sealer in food factories, breweries, electronic plants, farm buildings, schools and hospitals where solvent vapours may interfere with products and processes.

Non Skid Deck Paint

A modified alkyd based coating filled with aggregate to give a low profile, non-slip surface which is easily applied to areas where sure foot conditions are essential. The product has good drying characteristics, hence short down times and can be applied to most surfaces without major preparatory steps. Size: 1ltr.

Uses: Metal and wood deck areas of seagoing vessels, wet and slippery walkways and production environments, where minimum interruption can be tolerated.

Balcony Coating

Laydex Balcony Coating System provides a flexible, hard wearing and slip resistant finish to balconies and walkways. it is applied as a highly flexible, waterproofing base coat with a polyurethane top coat for good water resistance. As a liquid, it can be used to protect around pipes, rainwater outlets and protrusions more easily than sheet materials. It also seals the surface without joints or seams. Size: 5kg.

  • • Excellent waterproofing properties
  • • Permanently flexible
  • • Resistant to weathering and UV
  • • Excellent wear resistance
  • • A cold applied system for safer work at heights.

Patio Seal

A premium grade, eco-friendly solution designed to protect blocks and patios from water penetration, oil/petrol/grease spillages and dirt and grime build up. For enhancing the present colour and greatly extending the lifespan of block paving driveways or paths and patios. Size: 10kg.

Uses: The product is ready to use. Shake well before use. Ensure a dry surface and apply using a brush or roller, ensuring no ponding occurs. For best results apply two coats, allowing 3-4 hours between coats. Do not apply to wet surfaces, in conditions of high humidity or when rain is imminent.

Clear Coat Block Sealer

A ready to use, clear sealant flor block paving, paths and driveways. Protects from water penetration; staining and dirt/grime build-up. Advanced "Hybrid" technology. Excellent abrasion and chemical resistance. Inhibits organic growth. Size: 4ltr.

Uses: Designed to protect from water penetration, oil or grease spillages and dirt and grime build-up. Will enhance present colour and extend the lifespan of the treated surface. Solvent-free formulation, low odour, facilitates easier cleaning, improves water resistance and UV resistance and contains fungicide which retards mould growth.

Decking Sealer

Protects timber from water damage. For Decking and External Timbers. Allows wood to breathe and weather naturally over time. Size: 5ltr.

Tarmac Restorer

A ready-to-use, black, water-based coating for tarmac drives and pathways. Restores tarmac colour. Helps protect from water damage. Ready to use. Reduces dirt and grime build-up. Inhibits organic growth. Size: 4ltr.

Uses: Designed to restore colour of Tarmac drives and pathways, reduce water penetration, and protect from dirt and grime build-up. Simple brush on application.

Tennis Court Paint

Has been developed in conjunction with specialised sports contractors to meet the specific requirements of tennis and other sports pitches. It retains the porosity needed to allow surface water to be absorbed, where no other means of drainage is possible and remains anti-slip. Size: 5ltr.

Uses: This product is a spray applied water-based acrylic coating and gives a porous and anti-slip surface, it is tough & long lasting and includes special adhesion promoters for tenacious adhesion to bituminous surfaces. It contains fungicide and algicide. Approx coverage: 30-40 sq m per 5 ltr.

Floorcote Contract Finish

An alkyd based economical floor coating which is easy to apply and causes minimum reaction when applied over previously painted surfaces. Ideal for fast turnaround applications in factories and commercial areas requiring a hard wearing full gloss finish. Size: 5ltr.

Uses: Can be applied to most floor areas including workshops, offices, factory floors and warehouses where a cost effective finish is required.

Epoxy Finish

A polyamide adduct cured two pack epoxy finish for maximum protection against abrasion, chemicals and solvents. Epoxy Finish will give superb penetration, bonding and a resistant, durable surface able to withstand years of heavy duty wear requiring minimum maintenance. For wet and dangerous areas a non-skid version is recommended.

Uses: Ideal for decks, walkways, heavily used wet areas, factories subject to heavy traffic (fork lift areas) and transport depots where maximum resistance to abrasion, chemicals, sea water, solvents and high humidity are required.

Floorcote Polyurethane Finish

A medium duty, economical industrial floor coating based on a modified polyurethane alkyd. The product is easy to apply and causes minimum reaction when applied over previously painted surfaces.

Uses: Ideal for fast turnaround applications in workshops, offices, factory floors, garages, showrooms and warehouses where a cost effective but oil and chemical resistant finish is required.

Solvent Free Epoxy

A solvent free epoxy based floor coating with excellent abrasion and chemical resistance. When fully cured the product is extremely hard and tough and is able to withstand years of heavy duty wear, requiring minimum maintenance.

Uses: This product is suitable for application where low odour and no solvent vapour are important, especially schools and hospitals. Ideal for factories and chemical plants where heavy traffic (foot and fork lift) is expected.

Industrial Floor Paint

A single pack floor coating based on a specially selected blend of tough chemical resistant modified alkyds, combined with durable pigments, giving a fast hardening and wear resistant finish

Uses: Can be applied to most floor areas including workshops, offices, factory floors, showrooms and warehouses where a cost effective but oil and chemical resistant finish is required.

High Performance Two Part

A two part high performance, solvent free and ultra chemical resistant epoxy resin floor coating. This may be used as a hard wearing coloured floor coating in manufacturing environments such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required. The system can incorporate graded aggregate between costs to provide a slip-resistant profile, or as a line-marking product in areas requiring demarcation.

  • • Chemical resistant
  • • Hard wearing
  • • Abrasion resistant
  • • Solvent free, low odour
  • • Aesthetically attractive - brightens up dull factories and warehouses
  • • Seamless and hygienic finish
  • • Spil resistant finish can be tailored to specific client requirements
  • • Nonylphenol free

Floorcote Rubberised Finish

Chlorinated rubber floor coating with high chemical resistance, giving maximum intercoat adhesion and low moisture permeability. resists acids, alkalines, oxidants and chemicals. Resistant to high humidity, water and aggresive exposure conditions.

Uses: Ideal for farm buildings, abbatoirs, pickling and plating areas, chemical environments and general factory areas requiring good floor grip.

Industrial Floor Paint

A single pack fast drying highly durable moisture resistant resin formulated with high quality pigments giving a very versatile road line marking coating. Key benefits are:

  • • Fast drying minimises down time
  • • Can be reflective by addition of reflective glass beads
  • • Highly durable
  • • Range of bright, fade resistance colours suitable for asphalt and concrete substrates

Uses: Typical uses in line marking of:

  • • Railways, ports, factories, schools and warehouses
  • • Car parks and car parking bays
  • • Roads and tennis hardcourts
  • • Kerbs and stair-treads etc.