TREMCO Floor Screeds and Levelling Compounds

CS300 Polyurethane Screed

Tremco CS300 is a high performance polyurethane floor screed for industrial and commercial environments where resistance to chemical spillage and regular washing is a requirement. This product has a lightly profiled non-slip matt texture, and can be steam cleaned when applied to a thickness of 9mm. A coving grade, Tremco CS305, is available.

Suitable for: Food and drink productions areas, laboratories, constantly wet areas, clean rooms, full fork-lift traffic, chemical exposure.

CS350 Self Smoothing Epoxy Screed

Tremco CS350 is a high performance epoxy resin flooring system, typically applied at 2-3mm thick. This provides a hygienic, dust free floor with excellent mechanical and chemical resistance.

Suitable for: Warehouses, laboratories, clean rooms, full fork-lift traffic,

production areas, plant rooms

CS375 Uniflow Px-1 Industrial Wearing Screed

Tremco CS375 Uniflow Px-1 is a high performance cementitious self smoothing compound, based on the latest in cement and polymer technology. Mixed with water, a highly fluid, fast-setting compound is produced which is suitable for use in industrial environments, giving a very hard wearing floor. Typically applied at 5mm to 10mm thickness.

Suitable for: Warehouses, dry production areas, full fork-lift traffic.

CS380 Pourable Industrial Flooring

Tremco CS380 is a low cost, high strength, industrial floor levelling compound, suitable for internal and external applications. It is ideal for providing smooth but slip-resistant surfaces where the concrete has a tamped rough finish or where excessive wear has taken place and is particularly suited in wet environments.

Suitable for: External concrete, small to medium size projects, warehouses.

Tremco SX220 Self Levelling Compound

Tremco SX220 is a fast setting cement based smoothing product for use in domestic, light commercial and industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring.  

Benefits:

  • - May accept foot traffic after approximately 2 hours
  • - Excellent flow for smoothing uneven floors
  • - Suitable for use before laying floor coverings
  • - Low odour and low VOC
  • - It is easy to mix and apply and a smooth surface is produced

Click to download technical datasheet

Tremco SX301 Unispec Fast Set Latex Smoothing Underlayment

Tremco CS175 (formerly Treadfast CS Primer) is a two part water based epoxy primer that provides a breathable seal for calcium sulfate screeds.

Benefits:

  • - May accept foot traffic after approximately 90 minutes.
  • - A low cost viable option in flooring installations
  • - Protein free and so can be used in biologically sensitive areas
  • - Extremely low odour with no unpleasant ammonia smell
  • - It is easy to mix and apply and a smooth surface is produced

Tremxo SX301 has been designed for use in domestic, light commercial and industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring.

Click to download technical datasheet

Tremco SX302 Moisture Tolerant Latex Underlayment

Tremco SX302 is a moisture tolerant cement based latex underlayment for use in domestic, light commercial and industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring.

Benefits:

  • - May accept foot traffic after approximately 90 minutes.
  • - Moisture tolerant for use under surface damp proof membranes
  • - Protein free and so can be used in biologically sensitive areas
  • - Extremely low odour with no unpleasant ammonia smell
  • - It is easy to mix and apply and a smooth surface is produced

Click to download technical datasheet

Tremco SX300 Unitex NA High Performance Latex Underlayment

Tremco SX300 (formerly Treadfast Unitex NA) is a two part general purpose smoothing underlayment for interior applications.

Benefits:

  • - Low odour and protein free, complies with HTM 61 requirements
  • - Short setting and cure time, facilitating fast track programs and minimising disruption
  • - Excellent adhesion to a wide range of common flooring substrates, including: concrete, sand/cement screeds, flooring grade asphalt, Treadfast surface DPM’s, etc.
  • - Water resistant: can be used for pre-smoothing
  • - Self priming on most surfaces

Tremco SX300 Unitex NA is specifically designed for the preparation and smoothing of interior subfloors prior to:

  • - the application of a liquid applied damp proof membrane
  • - receiving a floorcovering

Click to download technical datasheet

Tremco SX200 Unismooth Self-Levelling Green Smoothing Compound

Tremco SX200 is manufactured from a combination of natural and recycled raw materials and is free from Portland cement. A fast drying pump applied underlayment, for levelling of concrete floors before the installation of floor coverings. e.g. vinyl, carpets, ceramic tiles, wood block, linoleum or cork.

Benefits:

  • - Good resistance to point loading and abrasion
  • - Self-levelling
  • - Rapid installation – 2000 m² per day for 7 mm thickness, under suitable conditions
  • - Fast setting - walk on after 2 - 4 hours under suitable conditions
  • - Fast drying - install most Floorcoverings after 24 hours dependent on thickness, ambient temperatures and humidity
  • - Single Pack
  • - OPC Free
  • - 38% recycled content
  • - Up to 30% reduction in environmental impact and global warming potential compared to traditional cementitious screeds
  • - Protein free - will not harbour bacteria
  • - HTM61 Compliant

Typical Uses: Suitable for floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons.

Tremco SX200 Self-Levelling Green Smoothing Compound is laid at 3 – 30 mm and provides good resistance to impact, point loading and abrasion.

Click to download technical datasheet

Tremco SX500 Rapid Drying Smoothing Compound

Tremco SX500 is a fast drying, smoothing compound for interior applications. BS EN13813:2002 This standard refers to the properties and performance of the product and the specification to which it has been tested. The data shown confirms the minimum compressive and flexural strengths that the product will achieve.

Benefits:

  • • Fast application and minimum down time
  • • Accepts both textile and resilient floor coverings in as little as 90 minutes
  • • Can be used with under floor heating
  • • Can be used on difficult substrates
  • • Protein free
  • • Low odour
  • • Application thickness of 2-15 mm
  • • OPC free
  • • 40% recycled content
  • • Moisture tolerant

Usages / Purposes: Tremco SX500 is designed for application to existing floors prior to the application of floor coverings including: vinyl, carpets, ceramic tiles, wood, etc.

Click to download technical datasheet

For technical data or COSHH sheets please contact us on 028 9038 2223 or sales@laydex.com