NBS Roofing Products

AUTOTENE BASE EP - Reinforced bitumen sheets for roofing

Elastoplastomeric distilled polymer-bitumen thermally-self-adhesive waterproofing first layer membranes.

Advantages:
• The waterproofing coat is glued onto the polystyrene foam, without nails and adhesives.
• It doesn’t need the protective layer on polystyrene foam.
• Two layers can be layed simultaneously.

View NBS listing

DEFEND ANTIROOT POLYESTER - Reinforced bitumen sheets for roofing

Elastoplastomeric polymer-bitumen waterproofing membrane, with an antiroot additive, for protecting roof gardens, sunken works and gravel covered roofs.

DEFEND ANTI-ROOT is produced in 2 versions:
– DEFEND ANTIROOT 15 POLYESTER
– DEFEND ANTIROOT 10 POLYESTER

Application:

It is always applied as the last waterproofing layer in contact with the earth for gardens. When waterproofing roof gardens for instance, it is used as the top layer of a system, the first layer being a polymer-bitumen membrane reinforced with “non-woven” polyester fabric and the second being DEFEND ANTIROOT POLYESTER which is placed astride the overlaps of the previous layer and full bonded with the torch, (see technical specifications n 10, Roof Gardens).

View NBS listing

FIDIA - Reinforced bitumen sheets for roofing

The FIDIA membranes are made up of distilled bitumen, selected for industrial use, with elastomeric and plastomeric polymers added to obtain a phase inversion compound whose continuous phase is formed by polymers in which the bitumen is dispersed, where the characteristics are determined by the polymeric matrix and not by the bitumen even though this is the most consistent ingredient. The performance of the bitumen is therefore increased along with the durability and the resistance to high and low temperatures while the already optimum adhesive and impermeable qualities of the bitumen remain unchanged.

Application:

The long lasting strength, elasticity and stability at high and low temperatures make FIDIA POLYESTER and MINERAL FIDIA POLYESTER membranes ideal for use as a single or multi-layer waterproofing systems for new building work or for refurbishment:

View NBS listing

FIRESTOP - Reinforced bitumen sheets for roofing

Fire resistant, elastoplastomeric, polymer bitumen waterproofing membrane, reinforced with "non-wowen" polyester single strand Spunbond fabric, with chemically inert flame retardant additives to protect flat or sloping roofs with visible waterproofing layers, also with thick termal insulation. Self protected with slate granules.

Advantages:
The membrane is fire resistant and can be laid even on insulation products with high thermal resistance.

View NBS listing

FLEXTER TESTUDO - Reinforced bitumen sheets for roofing

Reinforced elastoplastomeric distilled polymer-bitumen waterproofing membranes based on distilled bitumen and polyolefin copolymers.

Application:

The long-lasting mechanical resistance and elasticity properties, as well as the stability at high and low temperatures of the Flexter Testudo membranes allow them to be used as sealing elements in single or multiple layers, both protected and visible, in the building trade and civil engineering, both for new jobs and for refurbishments.

View NBS listing

INDEVER - Bitumen primers

Solvent-based primer. Bituminous solution containing and quick-dryng solvents. Packaging homologated in accordance with the ADR on the basis of Ministerial Decree DM 22/02/1990. The estimated yield on a concrete surface is roughly 350-500 g/mq and 200-300 g/mq on metal surfaces.

INDEVER
It is a bituminous primer made of a compound of solvents and oxidised bitumens. If applied as a thick waterproofing paint, when dry, INDEVER produces a film with a strong anchorage on every type of substrate without any degree of superficial stickiness. It also has excellent penetrating, adherence and consolidation properties when applied to dry concrete surfaces.

INDEVER WET CONCRETE
It is a bituminous primer made of a compound of oxidised bitumens, solvents and selected additives to improve anchorage, even on damp concrete surfaces (max 3%).

View NBS listing

MODO - Reinforced bitumen sheets for roofing

Elastoplastomeric polymer-bitumen waterpoofing membrane reinforced with rot-proof, "non-wowen" polyester fabric stabilised with rot-proof glass fibre mat.

Application:

The long lasting strength, elasticity and stability at high and low temperatures make MODO POLYESTER membrane ideal for use in non particularly cold climates, as a single or multilayer waterproofing systems for new building work or for refurbishment.

View NBS listing

PERFOBASE - Reinforced bitumen sheets for roofing

Perofrated, reinforced glass fibre mat, impregnated with a special elastomeric polymer-bitume mix for spot-bonding waterproofing systems.

Advantages:
• Allows the homogeneous distribution of the spot-bonded adhesion zone.
• The above layer is more resistant to the wind and is more stable to temperature variations.

View NBS listing

PROMINENT - Reinforced bitumen sheets for roofing

Elastoplastomeric polymer-bitumen draining waterproofing membrane and vapour barrier with an embossed upper face, reinforced with "non-woven fabric" polyester stabilised with roof-proof fibreglass, creating a vapour barrier where insulation panels can be bonded without using molten bitumen or cold adhesives, even on sloping roofs.

Advantages:
• Easy to glue also on slopes.
• Free from kettle encumbrance.
• Risk of scalding, fumes and odours eliminated during application.

View NBS listing

PROTEADUO - Reinforced bitumen sheets for roofing

ADVANCED TECHNOLOGY PRODUCT. Composite, multy-layer, waterproofing membrane with differentiated polymer-bitumen mix and composite reinforcement. The top layer is made of elastoplastomeric polymer-bitumen. Composite, stabilised, pre-coupled, three layer prefabricated reinforcement, with glass fibre mat compressed between two layers of rot-proof "non-wowen" polyester single strand Spunbonf fabric with elastoplastomeric polymer-bitumen. The upper face is coated with multi-functional TEXFLAMINA finish.

Advantages:
• It combines the advantages of APP bitumen with those of SBS bitumen.
• It lasts longer than both APP bitumen membranes and SBS bitumen membranes.
• It can be painted immediately.
• The only SBS bitumen membrane that is smooth (not slated) that can be directly asphalted.

View NBS listing

TECTENE BV STRIP - Reinforced bitumen sheets for roofing

Heat-adhesive vapour barriers in elastoplastomeric polymer distilled bitumen equipped with elastomeric heat-adhesive strips spread on the upper face of the membrane (such as strip), or on both faces (such as bistrip) for bonding the insulating panels.

Elastoplastomeric, polymer-bitumen, adhesive vapour barrier for bonding foamed polystyrene insulating panels, consisting of heat-adhesive strips on the upper face of the membrane, which is reinforced with strenghtened glass fibre mat.

Advantages:
• Even expanded polystyrene can be flameapplied.
• The self-heat-adhesive strips enable greater adhesion.

View NBS listing

TECTENE REROOF - Reinforced bitumen sheets for roofing

Thermally self adhesive waterproofing membrane in elastoplastomeric bitumen polymer c ontaining distilled bitumen, plastomers and elastomers for refurbishing work. The lower face treated with thermally adhesive strips

Advantages:
• The sheet to be used for semi-independence is supplied with the waterproof membrane.
• Thickness of heath-adhesive strips determine a thin interspace for vapour diffusion.
• The heat-adhesive elastomeric strips provide greater adhesion.

View NBS listing

PRIMERTEC AD - Bitumen primers

Bituminous elastomeric primer in quick drying solvent, particularly indicated for the preparation of application surfaces for PLUVITEC heat activated & self adhesive membranes. Particularly suitable also for those applications using cold bond adhesive systems, when compared to normal bituminous primers as the product has a higher elasticity and improved adhesion to the surface.

View NBS listing

PLUSGUM - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elasto-plastic polymers (APP) having a woven non woven single strand composite polyester reinforcement, which provide the membrane with high mechanical characteristics and excellent dimensional stability.

The V versions have a fibre glass reinforcement, with excellent dimensional stability.

The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane.

The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

View NBS listing

SUPERTEC AGREMENT - Reinforced bitumen sheets for roofing

Prefabricated modified composite polymer-bitumen waterproofing membrane, composed of distilled bitumen and polyolefin elastoplastomeric polymers (APAO) having excellent characteristics.

SUPERTEC P & PA are reinforced with a woven non woven single strand composite spunbond polyester fabric, having excellent mechanical characteristics as well as dimensional stability. SUPERTEC PA 4,5 kg/m2 is self-protected on the upper face with mineral slates which reduce heat absorption, improving the durability of the membrane, and has a 10 cm side selvedge and 15 cm head selvedge to promote the adhesion between the sheets. Further available finishes include talc, sand, PE film & polypropylene mat.

View NBS listing

ULTRATEC - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elastoplastic polymers (APP) having a woven non woven single strand composite polyester reinforcement, which provide the membrane with high mechanical characteristics and excellent dimensional stability.

The P version, on the upper face, has a woven non woven polypropylene finish which improves the walk ability and allows for immediate coating.

The PA versions are self protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane.

View NBS listing

MAXITEC VAPOUR BARRIER - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane for specific use as a total barrier to the passage of vapour.

The waterproofing mass is made of distilled bitumen and elastoplastic polymers (APP), reinforced with a rot proof fibre glass reinforcement and aluminium film which allows to obtain a barrier to the transmission of vapour.

MAXITEC VAPOUR BARRIER is also available with a special woven fibre glass tissue reinforcement that confer to the product exceptional mechanical characteristics and excellent dimensional stability.

Due to the characteristics, the membranes of the MAXITEC VAPOUR BARRIER range are used with success in the waterproofing of both civil and industrial works where required, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour.

View NBS listing

MAXITEC ANTI-ROOT - Reinforced bitumen sheets for roofing

Pre-fabricated membrane made of distilled bitumen and elastoplastic polymers (APP) specifically indicated for use on structures where vegetation is foreseen (ex. roof gardens, buried works, etc.).

The excellent and long lasting performance of MAXITEC ANTI-ROOT are given by the sum of the characteristics, the reinforcement and the waterproofing mass, opportunely added with a special chemical product (Preventol B2 Bayer) which confer a very high resistance to both root penetration as well as
aggressive chemicals such as fertilizers, herbicidals, etc.

The “anti-root” resistance of the material does not in any way affect the plants. The anti-root additive is not in anyway washed out of the compound and resists the heat of the open flame torch during application, therefore the product performs it’s function in a permanent way.

View NBS listing

TECH 3000 - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

The versions P & PA have a woven non woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability.

The V versions have a fibre glass reinforcement, with excellent dimensional stability.

The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane.

The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

View NBS listing

TECH MILLENNIUM - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers SBS and CPB (blend of copolymer polyolefin’s) from metallocene catalysis polymerization, reinforced with a woven non woven single strand composite polyester, which gives the membrane high mechanical characteristics and excellent dimensional stability.

The P version, on the upper face, has a woven non woven polypropylene finish which improves the walk ability and allows for immediate coating.

The V versions have a fibre glass reinforcement, with excellent dimensional stability.

View NBS listing

TECH 5000 S - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

The versions P & PA have a woven non woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability.

The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane.

The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

View NBS listing

SPECIALTEC - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and plastomeric polymers (APP) having a woven non woven single strand composite polyester reinforcement, which provide the membrane with good mechanical characteristics and excellent dimensional stability.

The V versions have a fibre glass reinforcement, with excellent dimensional stability.

The PA versions are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane.

The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

View NBS listing

TECH 3000 ANTI-ROOT - Reinforced bitumen sheets for roofing

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS), with a woven non woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability.

The excellent and long lasting performance of TECH 3000 ANTI-ROOT are given by the sum of the characteristics, the reinforcement and the waterproofing mass, opportunely added with a special chemical product (Preventol B2 Bayer) which confer a very high resistance to both root penetration as well as aggressive chemicals such as fertilizers, herbicidals, etc.

The “anti-root” resistance of the material does not in any way affect the plants. The anti-root additive is not in anyway washed out of the compound and resists the heat of the open flame torch during application, therefore the product performs it’s function in a permanent way.

View NBS listing

PLURA SELF-ADHESIVE V.B - Reinforced bitumen sheets for roofing

The bituminous PLURA SELF-ADHESIVE V.B. membranes are the arrival point of the latest generation of membranes denominated “composite”.

These membranes are so defined because thanks to new manufacturing technologies it is possible to produce materials with differentiated waterproofing mass, which allow the optimal utilization of each components properties, satisfying the different requirements.

View NBS listing

Specialtec V 2mm/3mm

Pre-fabricated waterproofing membrane made of distilled bitumen and plastomeric polymers (APP) having a woven non woven composite polyester reinforcement, which provide the membrane with good mechanical characteristics and excellent dimensional stability.

The versions V & VA have a fibre glass reinforcement, with excellent dimensional stability. The versions VA & PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

Click to download datasheet

View NBS listing

Supertec plain and mineral capsheet

Prefabricated modified composite polymer-bitumen waterproofing membrane, composed of distilled bitumen and polyolefin elasto-plastomeric polymers (APAO) having excellent characteristics and an ITC Agrement n° 634/05. SUPERTEC P & PA are reinforced with a woven non woven single strand composite spunbond polyester fabric, having excellent mechanical characteristics as well as dimensional stability.

SUPERTEC PA 4,5 kg/m2 is self-protected on the upper face with mineral slates which reduce heat absorption, improving the durability of the membrane, and has a 10 cm side selvedge and 15 cm head selvedge to promote the adhesion between the sheets. Further available finishes include talc, sand, P.E. film & polypropylene mat.

Click to download datasheet

View NBS listing

TECH 3000

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

Both versions P and PA have a woven non-woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability. The version PA is self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS Listing

TECH 5000 S

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

Both versions P and PA have a woven non-woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability. The version PA is self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS Listing

TECH MILLENNIUM

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers SBS and CPB (blend of copolymer polyolefins) from metallocene catalysis polymerization, reinforced with a woven non-woven, single strand composite polyester, which gives the membrane high mechanical characteristics and excellent dimensional stability. The P version, on the upper face, has a woven non-woven polypropylene finish which improves the walkability and allows for immediate coating.

View NBS Listing

Maxitec Anti-Root

Pre-fabricated membrane made of distilled bitumen and elastoplastic polymers (APP) specifically indicated for use on structures where vegetation is foreseen (for example roof gardens, buried works etc). The excellent and long lasting performance of Maxitec Anti-Root is provided by the reinforcement and waterproofing mass, with a special chemical product (Preventol B2 Bayer) added which confers a very high resistance to both root penetration as well as aggressive chemicals such as fertilizers, herbicidals, etc.

The 'anti-root' resistance of the material does not in any way affect the plants. The membranes are used with success for the waterproofing of both civil and industrial works where it is necessary to prevent the aggression of plant growth which may damage the integrity of the waterproofing layer, for example roof gardens, parking lots and underground works, retaining walls, flower boxes etc.

View NBS listing

Maxitec Vapour Barrier

Pre-fabricated waterproofing membrane for specific use as a total barrier to the passage of vapour.The waterproofing mass is made of distilled bitumen and elastoplastic polymers (APP), reinforced with a rot proof fibre glass reinforcement and aluminium film which provides a barrier to the transmission of vapour.

It is also available with a special woven fibre glass tissue reinforcement that confers to the product exceptional mechanical characteristics and excellent dimensional stability. Due to these characteristics, the range of membranes are used with success in the waterproofing of both civil and industrial works, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour.

View NBS listing

Perfobase

Perfobase/V has been studied and produced by INDEX to guarantee the uniform distribution of the bonding areas while using a torch, with no particular expertise of the operator required. It is a perforated, reinforced fibreglass mat, impregnated with special polymer modified bitumen which is compatible with both APP and SBS bitumen membranes.

Applications:

The product is used for spot bonding membranes with a torch. It should be used as a first connecting layer to avoid the formation of blisters in waterproofing membranes applied on concrete which will remain visible to the eye. It acts as a vapour diffusion layer if it is used as a connecting layer between a vapour barrier to be applied on a cement substrate of environments with a high level of relative humidity.

View NBS listing

Plura Self-Adhesive

This range of membranes is used with success in the waterproofing of both civil and industrial works, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour. In the stratification of the roof, the product must be positioned under the insulation, in order to preserve it from water vapour condensation, which can occur with the excursion changes of the thermal conditions of the roof.

Applications:

The Plura Self-Adhesive V.B. range is used with success in the waterproofing of both civil and industrial works where required, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour.

View NBS listing

Plusgum

Pre-fabricated waterproofing membrane made of distilled bitumen and elastoplastic polymers (APP) having a woven, non-woven single strand composite polyester reinforcement, which provides the membrane with high mechanical characteristics and excellent dimensional stability. The V versions have a fibre glass reinforcement, with excellent dimensional stability.

The PA versions are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS listing

Prominet ALU Polyester

Prominent is a vapour barrier membrane designed by INDEX to resolve the problem of waterproofing where insulation panels must be bonded without using molten oxidized bitumen or cold adhesives or mechanical fastening. The product prevents time being wasted waiting for cold bond adhesives to set or risks of burns when installing molten bitumen, along with a significant reduction in waste and pollution, and long setting times of cold glues.

Applications:

Used as a vapour barrier for insulation panels or stave-coupled insulation such as Thermobase which can be bonded to the membrane by heating the top face of the membrane with a torch. Prominent/V is used for roofs of places with a standard level of humidity, while Prominent ALU Polyester is used on the roofs of very humid buildings such as laundries or buildings in the textile industry etc and air- conditioned buildings with a relative humidity of over 80% at 20°C. Prominent Polyester is more resistant and can take nails, therefore it can be used on roofs of residential buildings with a wood floor.

View NBS listing

Proteaduo Triarmato

A multi-layer composite polymer-bitumen waterproofing membrane with a reinforcement impregnated with SBS-modified bitumen. The lower layer in contact with the laying surface is made of SBS-modified bitumen, while the upper layer is made of APP-modified bitumen.

It has a special composite prefabricated three-layer reinforcement, where the fibreglass mat is compressed between two layers of 'non-woven' Spunbond polyester fabric and so cannot damage the bituminous mass. Proteaduo Polyester is also reinforced with composite 'non-woven' polyester fabric which is stabilized with fibreglass mat to guarantee stability in hot conditions, while at low temperatures it behaves like a pure polyester reinforced membrane.

Due to the high heat resistance of the top polymeric layer, it can be covered with hot-laid bituminous conglomerate. The product can withstand exposure to the sun’s rays without heavy protection, but a coat of light coloured paint is always recommended, especially when applying on insulation. This will help to reduce the effects of thermal shock and also help to insulate the roof.

View NBS listing

Tectene Re-Roof Base Strip EP Polyester

Tectene Re-Roof Base Strip EP membrane is coated on the lower face with strips of a special adhesive elastomeric compound that is activated by heat, which determines a strong, safe and long-lasting semi-adhesion bond. The contact surface is about 40%, much higher than that of perforated screens, which do not exceed 20%, thus guaranteeing a much higher resistance to wind in view of the larger adhesion surface.

Applications:

It is designed for single-layer reroofing of old bituminous coverings, whereas Tectene Re-Roof Base Strip EP Polyester can be used both as a single-layer and as the base layer of double-layer reroofing on which a further membrane is subsequently torch-bonded. Both types can be used on flat or pitched roofs, up to a pitch of 15%.

View NBS listing

ARGO polyester MINERAL ARGO polyester ARGO/V

Reinforced Plastomeric Polymer-Bitumen Waterproofing Membrane made of Distilled Bitumen and Plastomers

The long lasting strength, elasticity and stability at high and low temperatures make ARGO POLYESTER and MINERAL ARGO POLYESTER membranes ideal for use in non cold climates, as a single or multi-layer waterproofing system either for new building work or for refurbishment:

• On all sloping surfaces: on flat, vertical and curved surfaces.
• On different types of substrates: site-cast or prefabricated concrete substrates, on timber roofing, on the most common thermal insulation used in the building trade.
• For the various uses: terraces, flat and sloping roofs, dielectric coatings and walls in contact with the ground.

The high dimensional stability of ARGO/V makes the membranes suitable for combining with elastomeric, elastoplastomeric and plastomeric membranes reinforced with “non woven” polyester fabric, to form double-layer waterproofing systems.

Click to download datasheet

View NBS listing

FIDIA - fidia POLYESTER - MINERAL fidia POLYESTER - fidia/V

Rinforced Elastomeric Polymer-Bitumen Waterproofing Membrane

The long lasting strength, elasticity and stability at high and low temperatures make FIDIA POLYESTER and MINERAL FIDIA POLYESTER membranes ideal for use as a single or multi-layer waterproofing systems for new building work or for refurbishment:

• On all sloping surfaces: on flat, vertical and curved surfaces.
• On different types of substrates: site-cast or prefabricated concrete substrates, on metal or timber roofing, on the most common thermal insulation used in the building trade.
• For the most varied uses: terraces, flat and sloping roofs, dielectric and acid-proof coatings and walls in contact with the ground.

The high dimensional stability of FIDIA/V makes the membranes suitable for combining with elastomeric, elastoplastomeric and plastomeric membranes reinforced with “non woven” polyester fabric. to form double layer waterproofing systems. FIDIA/V can also be used in a single layer as a vapour barrier.

Click to download datasheet

View NBS listing

Flexter Flex Testudo Spunbond Poliestere

Reinforced elastoplastomeric ECMB polymer-bitumen waterproofing membrane based on distilled bitumen and polyolefin copolymers

The optimal long-lasting stability at both high and low temperatures makes these membranes suitable for use in cold and tropical climates. The excellent adhesion to the surface to be covered and the optimal strength of the joints makes it possible to torch bond or mechanically fix the joints.

The long lasting strength and elasticity make FLEXTER FLEX ideal for use as a single or double layer waterproofing membrane for new building work or for various types of refurbishment both in the building trade and Civil Engineering:

• On all sloping surfaces: on flat, vertical and curved surfaces.
• On different types of substrates: site-cast or prefabricated concrete substrates, on metal or timber roofing, on the most common thermal insulation used in the building trade.
• For the most varied uses: terraces, flat and sloping roofs, dielectric and acid-proof coatings and walls in contact with the ground.

Click to download datasheet

View NBS listing

MODO POLIESTERE MODO/V

Reinforced Elastomeric Waterproofing Polymer-Bitumen Membrane

The long lasting strength, elasticity and stability at high and low temperatures make MODO POLYESTER membrane ideal for use in non particularly cold climates, as a single or multilayer waterproofing systems for new building work or for refurbishment:

• On all sloped surfaces: on flat, sloped and curved surfaces.
• On different types of substrates: site-cast or prefabricated concrete substrates, on timber roofing, on the most common thermal insulation used in the building trade.
• For the most varied uses: terraces, flat and sloping roofs, dielectric coatings and walls in contact with the ground.

The high dimensional stability of MODO V make the membrane suitable for combining with elastomeric, elastoplastomeric and plastomeric membranes reinforced with “non woven” polyester fabric to form double layer waterproofing systems.

Click to download datasheet

View NBS listing

DEFEND ALU/V

The Defend series of membranes are used as a vapour barrier layer of thermal insulation materials in construction covers. These membranes consist of non-porous, elastoplastomeric polymer-bitumen which, in itself, is an excellent barrier against vapour migration. There are three types of membranes:

Defend/V for the vapour barrier on roofs of rooms with low and medium humidity (RH at 20°C ≤80%). It is protected with a rot-proof reinforced fibreglass mat. It is also used as a sub-layer for double-layer waterproofing coats, to give dimensional stability to the top layer reinforced with polyester.

Defend ALU/V for the vapour barrier on roofs of insufficiently ventilated rooms with high humidity (RH at 20°C ≥80%). It is reinforced with a 60 micron aluminium foil, which is insuperable by vapour migration. The foil is associated with a fibreglass mat which increases its stability and mechanical resistance.

View NBS listing

DEFEND ANTIROOT POLYESTER

Defend Antiroot Polyester is a root resistant waterproofing membrane. The antiroot properties are obtained by adding phenoxifatty acid ester, a specific antiroot agent, to the polymer-bitumen compound. Once applied, it forms a continuous barrier against roots. As it does not contain film or double-reinforced foils, it is more flexible and malleable during application.

The additive has been developed specifically as a root inhibitor, for both hot-laid bitumen and for torch-laid bitumen membranes. The reinforcement of the membrane consists of a single strand Spunbond nonwoven polyester fabric, with high basic weight. This fabric is isotropic, rot-proof, thermally fixed and has high mechanical resistance, considerable ultimate elongation, excellent resistance to punching and laceration.

It has both faces coated with Flamina, the hot-melt film, which stops the rolls of material from sticking together. The reinforcement and the waterproofing mass are resistant to chemical effects of humic acids and fertilizers. It is used in all waterproofing systems in contact with the ground or where there is the risk of the system being attacked by roots.

View NBS listing

INDEX FIRESTOP

Firestop membranes are fire resistant with harmless inorganic anti-flame additives distributed right through the membrane. They can be applied without any protection on both flat and pitched roofs, even on insulating layers with high thermal resistance. The fire resistant properties are long-lasting and controlled constantly at the factory.

The three versions of Firestop membranes differ in terms of the type of mix: Mineral Helastopol Firestop is with elastomeric polymer-bitumen base, Mineral Elastocene Firestop is with polyolefin elastomers and copolymers polymerized with metallocene catalyst, while Firestop Polyester is with elastoplastomeric polymer-bitumen base.

View NBS listing

ISOLONDULA

A pre-shaped trapezoidal sheeting panel with lateral rabbet joints made of self-extinguishing sintered expanded polystyrene coupled hot to a 2 mm thick waterproofing membrane in elastoplastomer polymer-distilled bitumen, reinforced with rot-proof glass fibre with side and head overlaps. The panel is shaped to measure in order to match the profile of the asbestos roof and obtain a flat surface on any design.

Applications:

Used to repair and restore old fibre cement roofs and asbestos cement sheets without having to demolish them. This entirely avoids the costs related to their transport to landfills and the purchase and installation of their replacements. Shapes other than the ones normally produced can be supplied upon request.

View NBS listing

RESITRIX® SK W Full Bond

Well-proven with tens of millions of square metres already successfully installed worldwide

RESITRIX® SK W Full Bond is a heat weldable and glass- reinforced, composite rubber membrane with an EPDM core. The underside is fully coated with self-adhesive polymer modified bitumen, with a release film. RESITRIX® SK W Full Bond can be installed in a variety of applications, either fully exposed, for fully bonded systems or beneath roof gardens and living roof systems.

Click to download brochure

View NBS listing

RESITRIX® SK Partial Bond

Well-proven with tens of millions of square metres already successfully installed worldwide

RESITRIX® SK Partial Bond is a heat weldable and glass- reinforced, composite rubber membrane with an EPDM core. The underside is partially coated with self-adhesive polymer modified bitumen, with a release film.

Thanks to the partially coated self-adhesive underside, RESITRIX® SK Partial Bond allows permanent vapour pressure dissipation. RESITRIX® SK Partial Bond is therefore particularly advantageous for substrates that are prone to movement or which contain residual moisture.

Click to download brochure

View NBS listing

RESITRIX® SR

Well-proven with tens of millions of square metres already successfully installed worldwide

RESITRIX® SR is a light grey coloured, heat-weldable and glass-reinforced, composite rubber membrane with an EPDM core. The underside of the grey membrane is fully coated with self-adhesive polymer modified bitumen, with a release film.

Click to download brochure

View NBS listing

ALUTRIX 600 Self Heal Vapour Barrier

ALUTRIX 600 self-adhesive vapour barriers are used in a wide variety of applications in the building industry. They are suitable for all internal conditions, including very high humidity. They consist of a reinforced composite aluminium foil with a self-adhesive backing and removable release film.

It is particularly advantageous for use on profiled metal decking. ALUTRIX vapour barriers are quick to install and they create an airtight and vapourtight seal in accordance with Energy Conservation Regulations.

It has a very high tear resistance and can withstand foot trafficking on profiled metal decking, without puncturing. Its very high vapour resistance is sufficient to accommodate extreme internal conditions such as buildings containing wet industrial processes, breweries, swimming pools, sports halls, kitchens and bathrooms and many more.

View NBS listing

VODICHEM VODIPREN 2PUR

VODIPREN 2PUR is a revolutionary product. VODIPREN 2PUR is a polyurethane resin based liquid membrane with a low quantity of bitumen distilled in solvent. The product quickly vulcanizes in contact with air humidity producing a very elastic and adhesive film with excellent physical and chemical resistance features.

VODIPREN 2PUR can be used for waterproofing new terraces, balconies, old felts, metal roofing, concrete roofing etc. VODIPREN 2PUR can be used as a single coat product and as a wet on wet system. VODIPREN 2PUR when cured is UV stable and able to withstand pedestrian traffic. VODIPREN 2PUR maximises your time.

Click here to download VODIPREN 2PUR brochure

Click here to download VODIPREN 2PUR datasheet


View NBS Listing

InStar Type R (Rubber)

9mm thick rubber and are non stacking. These decking and paving supports provide good insulating properties against foot traffic sound and vibration, 2mm levelling shims are also available.


View NBS Listing

InStar Type P (Plastic)

A modular design allowing stacking

5 No: high to achieve maximum lift height of 150mm off the substrate

Available in thickness of 15, 20 and 30mm and with the option of 3mm levelling shims


View NSB Listing

INSTA-STIK 13.5kg Tank Professional Roofing Adhesive

INSTA-STIK roofing adhesive for professionals has been developed for the attachment of insulation boards to a variety of substrates on flat roofs.

INSTA-STIK is offered as a portable, disposable pressurised container requiring no external power source. It is a cold applied system that is, quick, easy to use and provides fast adhesion within 20–45 minutes.

Click to view brochure


View NBS Listing