Pluvitec Torch-on Felts

Click here to view Pluvitec IAB Cert 2013

Specialtec V 2mm/3mm

Pre-fabricated waterproofing membrane made of distilled bitumen and plastomeric polymers (APP) having a woven non woven composite polyester reinforcement, which provide the membrane with good mechanical characteristics and excellent dimensional stability.

The versions V & VA have a fibre glass reinforcement, with excellent dimensional stability. The versions VA & PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

Click to download datasheet

View NBS listing

Supertec plain and mineral capsheet

Prefabricated modified composite polymer-bitumen waterproofing membrane, composed of distilled bitumen and polyolefin elasto-plastomeric polymers (APAO) having excellent characteristics and an ITC Agrement n° 634/05. SUPERTEC P & PA are reinforced with a woven non woven single strand composite spunbond polyester fabric, having excellent mechanical characteristics as well as dimensional stability.

SUPERTEC PA 4,5 kg/m2 is self-protected on the upper face with mineral slates which reduce heat absorption, improving the durability of the membrane, and has a 10 cm side selvedge and 15 cm head selvedge to promote the adhesion between the sheets. Further available finishes include talc, sand, P.E. film & polypropylene mat.

Click to download datasheet

View NBS listing

TECH 3000

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

Both versions P and PA have a woven non-woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability. The version PA is self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS Listing

TECH 5000 S

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS).

Both versions P and PA have a woven non-woven single strand composite polyester reinforcement, with high mechanical characteristics and excellent dimensional stability. The version PA is self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS Listing

TECH MILLENNIUM

Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers SBS and CPB (blend of copolymer polyolefins) from metallocene catalysis polymerization, reinforced with a woven non-woven, single strand composite polyester, which gives the membrane high mechanical characteristics and excellent dimensional stability. The P version, on the upper face, has a woven non-woven polypropylene finish which improves the walkability and allows for immediate coating.

View NBS Listing

Maxitec Anti-Root

Pre-fabricated membrane made of distilled bitumen and elastoplastic polymers (APP) specifically indicated for use on structures where vegetation is foreseen (for example roof gardens, buried works etc). The excellent and long lasting performance of Maxitec Anti-Root is provided by the reinforcement and waterproofing mass, with a special chemical product (Preventol B2 Bayer) added which confers a very high resistance to both root penetration as well as aggressive chemicals such as fertilizers, herbicidals, etc.

The 'anti-root' resistance of the material does not in any way affect the plants. The membranes are used with success for the waterproofing of both civil and industrial works where it is necessary to prevent the aggression of plant growth which may damage the integrity of the waterproofing layer, for example roof gardens, parking lots and underground works, retaining walls, flower boxes etc.

View NBS listing

Maxitec Vapour Barrier

Pre-fabricated waterproofing membrane for specific use as a total barrier to the passage of vapour.The waterproofing mass is made of distilled bitumen and elastoplastic polymers (APP), reinforced with a rot proof fibre glass reinforcement and aluminium film which provides a barrier to the transmission of vapour.

It is also available with a special woven fibre glass tissue reinforcement that confers to the product exceptional mechanical characteristics and excellent dimensional stability. Due to these characteristics, the range of membranes are used with success in the waterproofing of both civil and industrial works, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour.

View NBS listing

Perfobase

Perfobase/V has been studied and produced by INDEX to guarantee the uniform distribution of the bonding areas while using a torch, with no particular expertise of the operator required. It is a perforated, reinforced fibreglass mat, impregnated with special polymer modified bitumen which is compatible with both APP and SBS bitumen membranes.

Applications:

The product is used for spot bonding membranes with a torch. It should be used as a first connecting layer to avoid the formation of blisters in waterproofing membranes applied on concrete which will remain visible to the eye. It acts as a vapour diffusion layer if it is used as a connecting layer between a vapour barrier to be applied on a cement substrate of environments with a high level of relative humidity.

View NBS listing

Plura Self-Adhesive

This range of membranes is used with success in the waterproofing of both civil and industrial works, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour. In the stratification of the roof, the product must be positioned under the insulation, in order to preserve it from water vapour condensation, which can occur with the excursion changes of the thermal conditions of the roof.

Applications:

The Plura Self-Adhesive V.B. range is used with success in the waterproofing of both civil and industrial works where required, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour.

View NBS listing

Plusgum

Pre-fabricated waterproofing membrane made of distilled bitumen and elastoplastic polymers (APP) having a woven, non-woven single strand composite polyester reinforcement, which provides the membrane with high mechanical characteristics and excellent dimensional stability. The V versions have a fibre glass reinforcement, with excellent dimensional stability.

The PA versions are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 100 mm and upon request a head selvedge of 150 mm, to improve adhesion between the sheets.

View NBS listing

Prominet ALU Polyester

Prominent is a vapour barrier membrane designed by INDEX to resolve the problem of waterproofing where insulation panels must be bonded without using molten oxidized bitumen or cold adhesives or mechanical fastening. The product prevents time being wasted waiting for cold bond adhesives to set or risks of burns when installing molten bitumen, along with a significant reduction in waste and pollution, and long setting times of cold glues.

Applications:

Used as a vapour barrier for insulation panels or stave-coupled insulation such as Thermobase which can be bonded to the membrane by heating the top face of the membrane with a torch. Prominent/V is used for roofs of places with a standard level of humidity, while Prominent ALU Polyester is used on the roofs of very humid buildings such as laundries or buildings in the textile industry etc and air- conditioned buildings with a relative humidity of over 80% at 20°C. Prominent Polyester is more resistant and can take nails, therefore it can be used on roofs of residential buildings with a wood floor.

View NBS listing

Proteaduo Triarmato

A multi-layer composite polymer-bitumen waterproofing membrane with a reinforcement impregnated with SBS-modified bitumen. The lower layer in contact with the laying surface is made of SBS-modified bitumen, while the upper layer is made of APP-modified bitumen.

It has a special composite prefabricated three-layer reinforcement, where the fibreglass mat is compressed between two layers of 'non-woven' Spunbond polyester fabric and so cannot damage the bituminous mass. Proteaduo Polyester is also reinforced with composite 'non-woven' polyester fabric which is stabilized with fibreglass mat to guarantee stability in hot conditions, while at low temperatures it behaves like a pure polyester reinforced membrane.

Due to the high heat resistance of the top polymeric layer, it can be covered with hot-laid bituminous conglomerate. The product can withstand exposure to the sun’s rays without heavy protection, but a coat of light coloured paint is always recommended, especially when applying on insulation. This will help to reduce the effects of thermal shock and also help to insulate the roof.

View NBS listing

Tectene Re-Roof Base Strip EP Polyester

Tectene Re-Roof Base Strip EP membrane is coated on the lower face with strips of a special adhesive elastomeric compound that is activated by heat, which determines a strong, safe and long-lasting semi-adhesion bond. The contact surface is about 40%, much higher than that of perforated screens, which do not exceed 20%, thus guaranteeing a much higher resistance to wind in view of the larger adhesion surface.

Applications:

It is designed for single-layer reroofing of old bituminous coverings, whereas Tectene Re-Roof Base Strip EP Polyester can be used both as a single-layer and as the base layer of double-layer reroofing on which a further membrane is subsequently torch-bonded. Both types can be used on flat or pitched roofs, up to a pitch of 15%.

View NBS listing

Ultratec plain and mineral capsheet

Pre-fabricated waterproofing membrane made of distilled bitumen and elasto-plastic polyolefin polymers (APP) having a woven non woven single strand composite polyester reinforcement, which provide the membrane with very high mechanical characteristics and excellent dimensional stability.

The versions P have a upper face finish with a woven non woven polypropylene mat which increases surface walkability and allows for immediate painting. The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the sheets.

Click to download datasheet

Pro Tech re roof mineral capsheet

Prefabricated modified composite polymer-bitumen waterproofing membrane composed of distilled bitumen and differentiated waterproofing masses, specifically designed for use over old bituminous waterproofing membranes.

The upper face compound is composed of distilled bitumen and elasto-plastomers while the lower face compound is composed of distilled bitumen and special polymers which provide particular characteristics of adhesion & workability.

Click to download datasheet

Pluvitec 20 Year Warranty System

All installation work must be carried out by trained installers in accordance with the manufacturers installation instructions.

Waterproofing system;

1st Layer ~ Vapour Barrier = Specialtec V 2mm

2nd Layer ~ Base sheet = Specialtec V 3mm

3rd Layer ~ Cap Sheet = Supertec PA 4.5kg/m ²

For a copy of warranty please contact the Laydex Office